Asbestos-free reinforced Tseason waterproof fibre cement sheet is made of wood fiber, Portland cement, quartz sand, auxiliary materials, and other substances by computer precision batching.
Product Features
Ficem board is widely used in industrial and civil buildings and office buildings. It is used for moisture-proof, fire-proof wall partitions and ceilings on relatively humid occasions. It is also widely used in offices, hotels, hospitals, factories, schools, villas, theaters, and art buildings.
A1 Level Fireproof
Waterproof
Light Weight,High Strength
Moisture-proof, Insect and Mothproof
Temperature and Heat Insulation.
High-quality chemical raw materials and processes determine its products with an intense flame through fire, smoke, and toxic, corrosive foam of small, unique quality. Compared with ordinary PUR rigid polyurethane foam, it has high thermal stability, excellent flame retardancy, low smoke emission, and so on.
Production Features
The unique corona treatment, enhances degree
Micro atomization online
Special stainless steel panel continuous forming technology
Constant temperature air drying system
Our Partners
Parameters
Length
2440mm, 3000mm
Width
1220mm
Thickness
4-20mm
Node Installation
Exterior Wall Installation
1. The frame of the fixed wall panel should be smooth and strong, and it is strictly prohibited to have the protrution of fasteners or welding slag left after welding.
2. The wall panels should be fixed after the overall construction of the house frame is completed.
3. The whole board (1220×2440) large panel fixing must comply with the principle of gradually fixing from the middle of the board to the four sides.
4. In special cases, if the edge of the nail hole center distance plate cannot meet the requirements of 13-15mm, it should be added to meet the requirements 5. After fixing the tapping nail, primer should be applied to the nail head in time toprevent the nail head from rusting.
6. When the hole is needed, the line can be drawn on the wall according to the requirements, and the hole must be slightly larger than the inlay.
Partition wall installation
1. The two long sides of the fibre-reinforced cement board have been chamfered. If the wall is higher than 2440mm, the short side of the horizontal combination of the board must be chamfered on site (planed into a beveled edge of about 25mm width) in order to better handle the joint.
2. Elastic wire and mark the fixing point of the plate, and make pre-drilling treatment at the same time (the aperture is slightly larger than the screw head 1-2mm, the hole depth 1-2mm) the fixing point distance from the plate Angle
40-50mm, the fixing point distance 250-300mm.
3. When fixing the fiber-reinforced cement board, the board and keel should be pre-drilled, and the aperture should be 1mm smaller than the screw diameter. When fixing with self-tapping nails, it should be fixed from the middle of the board to the periphery, and all screw heads should be sunk into the board surface 1mm. In fastening, the plate must be nailed to the keel armour.
Applications
Tseason has its own IBIM(Building Information Modeling) Objects, which can provide you with a crucial and even mandated process to ensure building planning, design, and construction are highly efficient and collaborative.
